Board Etching

Had another go at etching with this new paper.  I still have some small issues with not all the toner transferring off the paper.   Its much better now that I use scotch brite to rub up the boards and not use emery paper. I think I'm getting a handle on the heat by using an IR thermometer. Here's the link:

http://www.ebay.com/itm/Nice-Non-Contact-LCD-IR-Laser-Infrared-Digital-Temperature-Thermometer-Gun-FO-/291326656758?pt=LH_DefaultDomain_2&hash=item43d46c00f6

Still need to work a little more on board cleaning and then a little more patience. That should do the trick. The darker areas are some spots where I used a sharpie to go over where the toner did not adhere.  Didn't discolour in all areas though.